Jotun AntiPest 2.5 Litre
£63.55 (ex. VAT)
Description
Jotun AntiPest is a two-pack epoxy, suitable as a long exposure undercoat for epoxy and polyurethane systems and is designed to prevent the osmosis in fibreglass boats.
AntiPest has excellent flow-out qualities and can be used both as primer for all types of substrates, including steel, fibreglass, aluminium and marine timber.
It is also suitable as as an intermediate adhesion undercoat for polyurethane or antifoulings. It is an ideal product for priming gelcoat before applying antifoulings.
AntiPest is particularly suitable for cycles against osmosis and provides a good anti-corrosive effect.
Jotun Antipest is a two-pack epoxy primer.
Size: 2.5 Litre
Colour: Aluminium Redtone
Specification |
|
| Gloss level | Flat |
| Water resistance | Excellent |
| Abrasion resistance | Very good |
| Flexibility | Good |
| Coverage | 8m² per litre |
| Application method | Spray, brush or roller |
| Touch Dry @ 23°C | 2 hours |
| Dry to re-coat @ 23°C | 4 hours |
| Curing time @ 23°C | 7 days |
| Thinner | Thinners No. 17 |
Suitability |
|||||||
 |
Above Water | |
Below Water | |
Aluminium | |
GRP |
|
Steel | |
Wood |
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Anti-Corrosive |
| Paint Type | Kit |
| Paint Components | 2-Pack |
| Ease of Use | Good |
| Substrate Suitability | Stainless Steel, Mild Steel, GRP, Galvanised Steel, Concrete, Aluminium |
| Surface Adhesion | Excellent |
| Above / Below Waterline | Below Water, Above Water |
| Water Resistance | Excellent |
| Abrasion Resistance | Very Good |
| Chemical Resistance | Very Good |
| Solvent Resistance | Very Good |
| Interior / Exterior Use | Exterior |
| UV Resistance | Fair |
| Gloss Level | Matt |
| Colour Retention | Fair |
| Flexibility | Good |
| Application Method | Airless Spray, Brush, Roller |
| Recommended Coats (Brush / Roller) | 3 |
| Chemical Composition | Epoxy |
| Brand Range | Antipest |
| Brush or Roller Coverage Rate (m2 / L) | 8 |
| Cured for Service 10C (days) | 12 |
| Cured for Service 23C (days) | 7 |
| Dry to Overcoat 10C (hours) | 12 |
| Dry to Overcoat 23C (hours) | 4 |
| Full Curing Time 10C (days) | 12 |
| Full Curing Time 23C (days) | 7 |
| Max Dry Film Thickness per Coat (microns) | 100 |
| Max Overcoating Time without Sanding (days) | Refer to data sheet |
| Min Dry Film Thickness per Coat (microns) | 60 |
| Pot Life 10C (hours) | 10 |
| Pot Life 23C (hours) | 8 |
| Product Type | Paint |
| Self-Priming | No |