Protecting Marine Vessels with Quality Anodes & Paints

Shaft Bonding Component

Shaft Earthing Assembly - Electro Eliminator
Whether your boat is steel or GRP, to provide the best protection to the stern gear the shaft should be fitted with an MGDUFF Electro Eliminator Brush assembly.The MGDUFF Electro-Eliminators offer the most effective shaft bonding solution. Running directly onto the propeller shaft the electro eliminator puts the anode in constant low resistance contact with the propeller shaft.

The copper graphite brushes will give at least 2000 running hours under normal conditions. The electro eliminators will also remove the interference to electronic equipment caused by the rotating shaft. 

TOP TIP Always use an Electro Eliminator in conjunction with the standard anode to engine bonding connection and not on its own!

To provide the best protection for the stem gear, the shaft should be fitted with an electro-elimininator brush and connected to the hull anode.

If you don't see the product you require, don't hesitate to Contact Us